Powered by Smartsupp
Skip to content

4"x40" | 97% Salt Rejection | 2,000 GPD | FilmTec NF90 Element

SKU NF90-4040
Availability:
Ships in 7 days
Original price $422.17 - Original price $422.17
Original price
$422.17
$422.17 - $422.17
Current price $422.17

DOW FilmTec Membrane Elements
DOW FILMTEC™ NF90-4040 Nanofiltration (NF) Membrane Elements for Commercial Systems


The DOW FILMTEC NF90-4040 membrane elements provide high productivity performance while removing a high percentage of salts, nitrate, iron and organic compounds such as pesticides, herbicides and THM precursors. The low net driving pressure of the FilmTec NF90-4040 membrane allows the removal of these compounds at low operating pressures. DOW FILMTEC NF90-4040 has a fiberglass outer wrap.

DOW FILMTEC NF90-4040 is FDA – 21 CFR 177.2550; Food and Drug Administration Compliant.

Product Specifications

FilmTec Membranes are FDA CompliantGenuine DOW FilmTec Membrane Element

Common Applications for FilmTec NF90-4040 Nanofiltration Elements:

  • Production of Drinking Water
  • Demineralization in Small Commercial Applications

Benefits of DOW FilmTec Commercial NF Membranes

  • High flux results in high yields
  • Low energy usage reduces power consumption and costs
  • Durable with good cleanability for long element life
  • FilmTec performance and quality



Specifications for NF90-4040

FilmTec Product: NF90-4040
FilmTec Part Number: 149983
Size (Approximate): 4" Dia. x 40"L
Flow Rate: 2,000 gpd (7.6 m³/d)
Applied Pressure: 70 psig (4.8 bar)
Stabilized Salt Rejection: >97%
Single Element Recovery: 15%
Exterior: Hard Shell Fiberglass
Membrane Type:
Polyamide Thin-Film
Composite

Permeate flow and salt rejection based: 2,000 ppm MgSO4 feed stream, 77°F, 15% recovery, 70 psig.

Operating Limits for NF90-4040

Maximum Operating Temperature: 113°F (45°C)
Maximum Operating Pressure: 600 psig (41 bar)
Maximum Pressure Drop: 16 psig (0.9 bar)
Maximum Feed Flow Rate: 16 gpm (1.4m³/h)
pH Range, Continuous Operation*: 2-11

pH Range, Short-Term Cleaning**:
1-13
Maximum Feed Silt Density Index: SDI 5
Fere Clorine Tolerance***: <0.1ppm

*Maximum temperature for continuous operation above pH 10 is 95°F
**Refer to cleaning guidelines.
***Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure.


Related Products for use with NF90-4040

PV4040PWG PVC Membrane Housing Pressure Vessel for 4" x 40" Membrane Element
PV4080PWG PVC Membrane Housing Pressure Vessel for (2) 4"x40" Membrane Elements
PV4040SSAU-316 Stainless Steel Membrane Housing Pressure Vessel for 4" x 40" Membrane Element
PV4080SSAU-316 Stainless Steel Membrane Housing Pressure Vessel for (2) 4" x 40" Membrane Element
PV4040SSAW-316 Stainless Steel End-Clamp-Style Membane Housing Pressure Vessels for 4" x 40" Membrane Elements
PV4080SSAW-316 Stainless Steel End-Clamp-Style Membane Housing Pressure Vessels for (2) 4" x 40" Membrane Elements
PV-IN410 Interconnector Coupler for Installing Multiple Elements in a housing - FilmTec part # 89055. Includes two o-rings.

Physical Dimensions of DOW FilmTec NF90-4040

DOW FilmTec Commercial NF Membrane Drawing
INCHES (MM)
A

40.0 (1,016)
B

1.05 (27)
C

0.75 (19) OD
D

3.9 (99)

NF90-4040 Fits nominal 4-Inch I.D. pressure vessels.