|
AMI Low Energy (Low Pressure) RO Membrane elements are specially designed to run at 150 psi while producing the same product flow as standard elements. By using these elements in your commercial reverse osmosis system, you can significantly reduce your operating costs in tap water applications. AM LE BWRO elements are wrapped in a hard shell of FRP for added strength and to withstand higher pressure drops.
AMI low energy brackish water RO membrane elements produce high quality water from tap or brackish water sources in commercial RO systems, and are among the finest in the industry. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in commercial RO systems. AMI Commercial LE Brackish Water Reverse Osmosis Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard PVC and Stainless Steel RO Membrane Housings.
AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.
|
|
M-B4040ALE Specifications
|
|
| AMI Part Number: |
M-B4040ALE |
| Membrane Size (Nominal): |
4 x 40 |
| Membrane Dimensions: |
3.9"Dia. x 40"L |
| Flow Rate: |
2,900 GPD (10,976 LPD) |
| Applied Pressure: |
150 psi (1 MPa) |
| Stabilized Salt Rejection: |
99% |
| Outer Wrap: |
Fiberglassed Shell |
| Membrane Type: |
Tap or Brackish Water |
| Membrane Sheet: |
TFC (Thin Film Composite) |
| Element Type: |
Spiral Wound |
| For Housing: |
Standard 4" x 40" |
| Feed Water Test Temperature: |
77°F (25°C) |
| Single Element Recovery: |
15% |
| Chlorine Tolerance: |
0 |
| Feed water pH Range: |
2-11 |
| Manufacturer: |
Applied Membranes, Inc. |
| Country of Manufacture: |
United States (USA) |
Can Replace:
|
DuPont DOW FilmTec BW30LE-4040, LC LE-4040
GE Desal AK4040FM
CSM RE4040-FL |
|
|
Note: Performance specifications based on 2,000 mg/l sodium chloride, 150 psi (1 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%.
|
