AMI 2.5x38 Seawater Desalination Reverse Osmosis Membrane AquaPro Replacement
For Replacement in Village Marine Watermaker Systems by Parker Racor
Add AMI Membrane Quality to your Existing Seawater Desalination Equipment
|
AMI 2.5" x 38" Seawater RO Membranes produce drinking water from seawater and are intended for use as replacements in Village Marine Watermakers Stowaway, LT, LTM, and PW Series with exceptional value and performance benefits. AMI SWRO membranes offer the high rejection and high productivity that is ideal for seawater desalination in shipboard applications, watermakers, land-based desalinators and sea-based desalinators.
AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.
Looking for a replacement seawater desalination membrane element for your watermaker filter system? View our Watermaker Replacement Membrane Chart.
Benefits of AMI Seawater Membranes for Village Marine Watermakers:
- Add AMI Membrane Quality and Value to your Existing Seawater Desalination Equipment
- Convert seawater into drinking water on yachts, boats, cruise ships, off- shore platforms, and resorts
- High Rejection & Flow Rate
- Made in the USA
- Manufactured in ISO 9001:2015 Certified Facilities
- 100% Performance and Quality Tested
- High Quality for Consistent and Reliable Performance
- Uses the most advanced membrane film technology and manufacturing processes
- Standard dimensions to fit in commonly available housings
|
|
Specifications for M-S2538A
|
|
| AMI Model Number |
M-S2538A |
For use in Systems:
|
Stowaway 800
LT Series 800 - 1800
LTM Series 500 - 1800
Pure Water Series 600-2,000
PW Series 600-2,000
|
Can Replace Models:
|
Village Marine 33-0238
AquaPro 33-0238
Parker 33-0238
|
| Size (Approximate): |
2.5" Dia. x 38"L |
| Flow Rate: |
550 gpd (2081 lpd) |
| Applied Pressure: |
800 psig (55 bar) |
| Stabilized Salt Rejection: |
99.6% |
| Minimize Salt Rejection: |
99.4% |
| Single Element Recovery: |
8% |
| Exterior: |
Hard Shell Fiberglass |
Membrane Type:
|
Polyamide Thin-Film
Composite |
|
|
Permeate flow and salt rejection based on 32,000 ppm NaCl feed stream, pressure and recovery listed above. Element Permeate flow may vary +/- 20%
Operating Limits for M-S2538A
|
|
| Maximum Operating Temperature: |
113°F (45°C)
|
| Maximum Operating Pressure: |
1,000 psig (69 bar) |
| Maximum Pressure Drop: |
15 psig (1 bar) |
| Maximum Feed Flow Rate: |
6 gpm (1.4m³/h)
|
| pH Range, Continuous Operation: |
2-11 |
| pH Range, Short-Term Cleaning: |
1-13 |
| Maximum Feed Silt Density Index: |
SDI 5 |
| Fere Clorine Tolerance: |
0 |
|
|
|
|
Related Products for use with M-S2538A Seawater Elements
|
|
| C-C2510-A11 |
Membrane Cleaning Cartridge with Acid Cleaner to Remove Scale Buildup and Prolong Membrane Life |
| C-C2510-A22 |
Membrane Cleaning Cartridge with Alkaline Cleaner to Remove Organics and Prolong Membrane Life |
| C-C2510-A88 |
Membrane Preservative Cartridge for Preserving the System and Membrane During Extended Periods of Non-Operation. |
| 655139-03 |
Oil Absorbing Filter Cartridge - Oil-Water Separator Replacement Cartridge, 20" Big Blue Pentair Pentek Filter |
| H-F10100CF |
Plankton Filter - 10" Standard 100 Micron Spun Polypropylene Replacement Filter Cartridge |
|
|
Common Applications for AMI Seawater Watermaker Elements:
- Seawater Desalination
- Marine Applications
|
- Watermaker RO Systems
- Yachts
|
Physical Dimensions of M-S2538A Village Marine Replacement Element
 |
|
|
INCHES (MM) |
| L |
38.0 (965) |
| I |
36 (96) |
| D |
2.4 (61) |
| P |
0.75 (19) |
|
|
|
Replacement Compatibility for 2.5 Inch x 38 Inch Seawater RO Membranes
AMI 2538 membrane elements are intended to be used as direct replacements for Village Marine (VMT) Parker Racor AquaPro Membrane 33-0238, and are intended for use in any system using that element. Some common systems using these elements are Parker Racor Village Marine Stowaway, LT series, LTM Series,a nd PW Series. These include but are not limited to models: STW-800, LT-500, LT-800, LT-1000, LT-1300, LT-1800, LTM-500, LTM-800, LTM-1000, LTM-1300, LTM-1800, PW-600, PW-800, PW-1200, PW-1600, PW-2000, 90-8299, 90-8300, 90-8301, 90-6019, 90-6047, 90-6048, 90-6078, 90-6049, 90-6050, 90-6051, 90-6079, 90-6052, 90-6053, 90-6080, 90-6054, 90-6055, 90-6081, 90-6056, 90-6076, 90-6077, 90-8125, 90-8006, 90-8223, 90-8636, 90-8635, 90-8634, 90-8028, 90-8637, 90-8047, 90-8638, 90-8292, 90-8038, 90-8210, 90-8606, 90-8212, 90-8040, 90-8600, 90-8603, 90-8601, 90-8017, 90-8604, 90-8554, 90-8039, 90-8597, 90-8598, 90-8011
If you do not see your system listed or wish to learn more about compatibilyt, please contact us. Our certified water treatment experts will be happy to discuss your application. To ensure prompt and accurate information, please include as much information about your system as possible, including: model, manufacturer, model of membranes being replaced, any available. product manuals or literature associated with your system, and photographs of your system or membranes.
