Powered by Smartsupp Skip to content
Order Status Order Terms FAQs Blog Contact Us About Us
2.5" x 40" | 1,000 GPD at 150 PSI | FRP Wrapped | Low Energy Commercial RO Membrane | Applied Membranes

2.5" x 40" | 1,000 GPD at 150 PSI | FRP Wrapped | Low Energy Commercial RO Membrane | Applied Membranes

by AMI
SKU M-B2540ALE
Availability:
In Stock for Immediate Shipment
$220.00 - $220.00
$220.00
$220.00 - $220.00
$220.00


2.5" x 40" Low Energy Brackish Water RO Membrane | Fiberglasssed Shell | 1000 GPD BWRO LE

AMI Low Energy (Low Pressure) RO Membrane elements are specially designed to run at 150 psi while producing the same product flow as standard elements. By using these elements in your commercial reverse osmosis system, you can significantly reduce your operating costs in tap water applications. AM LE BWRO elements are wrapped in a hard shell of FRP for added strength and to withstand higher pressure drops.

AMI low energy brackish water RO membrane elements produce high quality water from tap or brackish water sources in commercial RO systems, and are among the finest in the industry. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in commercial RO systems. AMI Commercial LE Brackish Water Reverse Osmosis Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard PVC and Stainless Steel RO Membrane Housings.

AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.

Genuine AMI Membranes ISO USA Quality

M-B2540ALE Specifications

AMI Part Number: M-B2540ALE
Membrane Size (Nominal): 2.5 x 40
Membrane Dimensions: 2.5"Dia. x 40"L
Flow Rate: 1,000 GPD (3,785 LPD)
Applied Pressure: 150 psi (1 MPa)
Stabilized Salt Rejection: 99%
Outer Wrap: Fiberglassed Shell
Membrane Type: Tap or Brackish Water
Membrane Sheet: TFC (Thin Film Composite)
Element Type: Spiral Wound
For Housing: Standard 2.5" x 40"
Feed Water Test Temperature: 77°F (25°C)
Single Element Recovery: 15%
Chlorine Tolerance: 0
Feed water pH Range: 2-11
Manufacturer: Applied Membranes, Inc.
Country of Manufacture: United States (USA)

AMI Membranes Product Specifications

Note: Performance specifications based on 2,000 mg/l sodium chloride, 150 psi (1 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%.

Features of AMI Brackish Water RO Membranes

  • Reduce operating costs and wear and tear on your system by running your system at a lower pressure.
  • High Rejection & Flow Rate
  • Hard fiberglass exterior provides added strength and withstands higher pressure drops than tape-wrapped elements.
  • Made in the USA
  • Manufactured in our ISO 9001:2015 Certified Facilities
  • 100% Performance and Quality Tested
  • Backed by our Experienced Technical Support Staff
  • High Quality for Consistent and Reliable Performance
  • Uses the most advanced membrane film technology and manufacturing processes
  • Standard dimensions to fit in commonly available housings

Applications for AMI Commercial BWRO Membranes

  • Restaurants
  • Aquariums
  • Whole House (Residential)
  • Office
  • Institutions
  • Hotels
  • Hospitals
  • Disaster Relief
  • Spot Free Rinse/Car Wash
  • Labs
  • Pharmaceutical
  • Humidification
  • Misting
  • Manufacturing
  • Rinse Water
  • Bottled Water
  • Water stores
  • Beverage
  • Food Processing
  • Ice Makers
  • Commercial Water Treatment
  • Ice Makers
  • Tap Water
  • Brackish Water
  • Wide Variety of Other Applications
25 x 40 BWRO Fiberglass FRP Shell Membrane Element Commercial

Physical Dimensions of M-B2540ALE:

Total Length (L):

40 In. (101.6 cm)

Membrane Length (I):

38 In. (96 cm)

Diameter (D):

2.5 In. (6.4 cm)

Have A Question? Let’s Talk.

CONTACT US
FAQS