AMI calcite filter cartridges are filled with 100% calcite media to naturally remineralize acidic drinking waters, raising the pH and alkalinity to a non-corrosive equilibrium. Calcite, a naturally occurring mineral, is self-limiting - dissolving only enough to increase the water's alkalinity to reach a non-aggressive, non-corrosive level. AMI calcite mineral cartridges are designed to fit standard filter housings for ease of compatibility - H-F2510CALCITE is 9.75" length (commonly referred to as a 10" filter cartridge) and fits inside of a 10" Standard and 10" SlimLine style filter housings (actual outside dimensions of these housings are approximately 4.5" OD x 11.5" H).
Features and Benefits of AMI Calcite Filter Cartridges
- Built-in 100 micron reticulated poly foam pre filter to prevent contamination buildup in the resin bed
- Built-in 20 micron spun-bonded polypropylene post filter to prevent media fines from being washed out of the filter cartridge
- Raises pH of water to a non-corrosive equilibrium
- Reduces Leaching of Metal Plumbing Components and Copper Piping
- Contains 100% calcite filtration media, a naturally occurring mineral
- Low uniformity coefficient for maximum contact
- Slower Reacting for controlled pH correction
- Standard Cartridge Design Fits Most Standard Residential and Commercial Filter Housings
- Assembled and Quality Tested in the USA in an ISO 9001-2015 QMS Certified Facility
|
|
H-F2510CALCITE Specifications
|
|
Model: |
H-F2510CALCITE |
Brand: |
AMI |
Media: |
100% Calcite |
Purpose:
|
Neutralize Low pH Drinking Water |
Nominal Filter Size:
|
10" Standard 2.5" Dia. x 9.75" Length |
For Housing Size:
|
Fits #10 Standard 10" Filter Housing - Approx. Outside Dimensions: 4.5"OD x 12"H |
For Filter Housings:
|
Pentek, Pentair, American Plumber, US Filter, Culligan, Cuno, AquaPure, Sears, Fulflo, Master Plumber, Flotec, Honeywell, GE, and more.
|
Maximum Flow Rate: |
5 GPM |
Neutralization Capacity:
|
8,486 gallons @ 10 ppm Free CO2 4,243 gallons @ 20 ppm Free CO2 2,829 gallons @ 30 ppm Free CO2 2,122 gallons @ 40 ppm Free CO2 1,697 gallons @ 50 ppm Free CO2 1,414 gallons @ 20 ppm Free CO2
|
|
|
*The capacities listed above are an approximate idea of the life of calcite for PH adjustment. The actual value will depend on many factors including the flow rate, water TDS, etc. Use this information as a reference only. These are not guaranteed values.
|