|
Applied Membranes (AMI) Commercial CTA RO Membranes Remove up to 96% of total dissolved solids and feature a Chlorine Tolerance of 0.3 to 0.5 ppm.
With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in small commercial RO systems. AMI Small Commercial CTA RO Membranes are constructed of CTA (Cellulose Triacetate) membrane material and fit standard PVC and Stainless Steel RO Membrane Housings.
AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.
Features of Applied Membranes Commercial CTA RO Membranes
- Chlorine Tolerant
- Made in the USA
- Manufactured in our ISO 9001:2015 Certified Facilities
- 100% Performance and Quality Tested
- Backed by our Experienced Technical Support Staff
- High Quality for Consistent and Reliable Performance
- Standard dimensions to fit in commonly available housings
|
|
Specifications for M-C4040A
|
|
| Part Number: |
M-C4040A |
| Membrane Size (Nominal): |
4 x 40 |
| Membrane Dimensions: |
3.9"Dia. x 40"L |
| Flow Rate: |
1,000 GPD (3,785 LPD) |
| Applied Pressure: |
225 psi (1.6 MPa) |
| Stabilized Salt Rejection: |
96% |
| For Housing: |
Standard 4" x 40" |
| Outer Wrap: |
Tape Wrapped |
| Membrane Sheet: |
CTA (Cellulose Triacetate) |
| Element Type: |
Spiral Wound |
| Feed Water Test Temperature: |
77°F (25°C) |
| Single Element Recovery: |
15% |
| Chlorine Tolerance: |
0.3-0.5 ppm
(1 ppm maximum) |
| Feed water pH Range: |
4-6 (continuous) |
| Cleaning pH Range: |
3-8 (30 minutes) |
| Maximum Operating Pressure: |
300 psig (2.1 MPa) |
| Maximum Operating Temperature: |
104°F (40°C) |
| Maximum Feed Water Turbidity: |
1 NTU |
| Maximum Feed Water SDI (15 min): |
4 |
| Maximum Pressure Drop: |
13 psig (0.9 bar) |
| Maximum Feed Flow: |
17 gpm |
| Minimum Brine to Feed Flow Ratio: |
5:1 |
| End Style: |
Male PWT (Stinger Style) |
| Manufacturer: |
Applied Membranes, Inc. |
| Country of Manufacture: |
United States (USA) |
|
|
Note: Performance specifications based on 500 ppm tap water, 225 psi (1.6 MPa) applied pressure, 77ºF (25ºC) feed water temperature, and the recovery listed in the table above. Element permeate flow may vary ± 20%.
|
