|
AMI 2.5" x 38" Seawater RO Membranes produce drinking water from seawater and are intended for use as replacements in Village Marine Watermakers Little Wonder 200 LW-200 with exceptional value and performance benefits. AMI SWRO membranes offer the high rejection and high productivity that is ideal for seawater desalination in shipboard applications, watermakers, land-based desalinators and sea-based desalinator.
AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.
Looking for a replacement seawater desalination membrane element for your watermaker filter system? View our Watermaker Replacement Membrane Chart.
Benefits of AMI Seawater Membranes for Village Marine Watermakers:
- Add AMI Membrane Quality and Value to your Existing Seawater Desalination Equipment
- Convert seawater into drinking water on yachts, boats, cruise ships, off- shore platforms, and resorts
- High Rejection & Flow Rate
- Made in the USA
- Manufactured in ISO 9001:2015 Certified Facilities
- 100% Performance and Quality Tested
- High Quality for Consistent and Reliable Performance
- Uses the most advanced membrane film technology and manufacturing processes
- Standard dimensions to fit in commonly available housings
|
|
Specifications for M-S2538A-210 33-3002
|
|
| AMI Model Number |
M-S2538A-210 |
| For use in Systems: |
Little Wonder 200
|
Can Replace Models:
|
Village Marine 33-3002
AquaPro 33-3002
Parker 33-3002
|
| Size (Approximate): |
2.5" Dia. x 38"L |
| Flow Rate: |
210 gpd (795 lpd) |
| Applied Pressure: |
800 psig (55 bar) |
| Stabilized Salt Rejection: |
99.6% |
| Minimize Salt Rejection: |
99.4% |
| Single Element Recovery: |
8% |
| Exterior: |
Hard Shell Fiberglass |
Membrane Type:
|
Polyamide Thin-Film
Composite |
|
|
Permeate flow and salt rejection based on 32,000 ppm NaCl feed stream, pressure and recovery listed above. Element Permeate flow may vary +/- 20%
Operating Limits for M-S2538A-210 33-3002
|
|
| Maximum Operating Temperature: |
113°F (45°C)
|
| Maximum Operating Pressure: |
1,000 psig (69 bar) |
| Maximum Pressure Drop: |
15 psig (1 bar) |
| Maximum Feed Flow Rate: |
6 gpm (1.4m³/h)
|
| pH Range, Continuous Operation: |
2-11 |
| pH Range, Short-Term Cleaning: |
1-13 |
| Maximum Feed Silt Density Index: |
SDI 5 |
| Fere Clorine Tolerance: |
0 |
|
|
|
