Prevent Membrane Fouling with simple SDI.
Simple SDI silt density index meter offers automatic and portable Silt Density Index testing. The Simple SDI microprocessor precision plus high resolution flow measurement guides you through the test process accurately calculates the SDI of the water, eliminating manual calculations and margin of error.
Clear, easy to read LCD display prompts the operator through the test procedure and displays current test data while silt density index tests are underway. Audible alerts notify the operator at the end of the silt density index test as well as if any errors have occurred.
Benefits of Simple SDI Automatic Silt Density Index Tester
- Routine SDI measurement can prevent membrane fouling and improve the efficiency of RO systems.
- simple SDI offers automated test process for simpler, easier and accurate SDI measurements.
- simple SDI is compact, lightweight and battery powered for easy portability.
- Performs SDI 5, 10 and 15 minute tests with both 100 ml and 500 ml sample size tests – provides useful data which is especially helpful on high SDI waters.
- Unattended operation. Start the simple SDI test and return in 15 minutes for the results – saves you time.
- Real-time display of results including SDI, current flow rate and elapsed time. End of test display includes SDI 5, 10 & 15 with 100 ml and 500 ml results.
- More accurate than hand testing (ASTM D 4189-95) – consistent results provides better information.
- Uses standard 47 mm membrane filters – for lower consumable cost and worldwide availability.
What's New in version 2.0?
After nearly 20 years since the original simpleSDI instrument, we’ve completely redesigned the instrument to make it more reliable, more accurate and added new features.
- New Lithium Polymer battery for more tests per charge, lighter weight and longer life.
- New built-in prefilter to ensure that the flow sensor is protected from particulates.
- New dual pressure regulator design provides safe operation up to 100psi and improves accuracy by regulating the pressure to the test regulator.
- simple SDI uses ASTM D4189-14 compliant .45 micron, 47 mm, MCE membranes for standards compliance and consistent test results.
- simple SDI is housed in a rugged crush-proof case. No flimsy tissue-thin plastic here.
|
|
Simple SDI Specifications
|
|
| Model: |
Simple SDI v2.0 |
| Part #: |
182-10025 |
| Tests Performed |
SDI-5 Range: 0-20
SDI-10 Range: 0-10
SDI-15 Range: 0-6.7 |
Dimensions:
|
14" x 11.25" x 4.75"
(356mm x 286mm, x 121mm) |
| Weight: |
6 lbs (2.7 kg) |
| Battery Type: |
6 Volt, 3000 mAH Lithium Polymer (LiPo) |
| Battery Life: |
At least 5 years of typical usage. (Over 300 full charge cycles) |
| Battery Capacity: |
Approximately 30 hours of testing. |
| Power Supply: |
5VDC, USB-A Port Charger, (e.g. phone, tablet or other device charger (user supplied)) |
| Water Pressure: |
35 - 100 psi |
| Water Temperature: |
35-100°F |
| Test Inlet: |
1/4" OD Tubing |
| Applicable Standard: |
ASTM D4189-07 (2014) |
|
|
SDI Filters
SIMPLE SDI Kit includes ten (10) SDI membrane filters. A filter pack should also be purchased.
|
|
|
|
Part #: SDI-045
Filters for SDI Testing 47mm 0.45 MF white disk membrane filters.
Pack of 100
|
|
 |
|
Part #: 182-30050
Replacement 50 Micron Pre-filter for Simple SDI Tester
|
|
 |
|
|
|
|
