4" x 40" Nanofiltration Membrane | NF9 – 90% Salt Rejection | 97% Hardness Rejection
Applied Membranes NF9 spiral wound nanofiltration elements provide high productivity performance while removing a high percentage of salts, nitrate, iron and organic compounds such as pesticides, herbicides and THM precursors. The low net driving pressure of the NF9 membrane allows the removal of these compounds at low operating pressures.
Applied Membranes nanofiltration elements are manufactured in our ISO 9001:2015 certified facility and are 100% quality and performance tested.
Features of Applied Membranes Nanofiltration Membranes:
- 90% average ion rejection
- >97% hardness rejection
- High flux results in high yields
- Low energy usage reduces power consumption and cost
- Durable with good cleanability for long element life
- Manufactured in our ISO 9001:2015 certified facilities
- 100% performance and quality tested
- Backed by our experienced technical support staff
- High quality for consistent and reliable performance
- Uses the most advanced membrane film technology and manufacturing processes
- Standard dimensions to fit in commonly available housings
Applications for Nanofiltration Membrane Elements:
- Commercial water demineralization
- Food and beverage
- Pharmaceutical
M-N4040A9 Specifications
| Part Number: |
M-N4040A9 |
| Membrane Size (Nominal): |
4x40 |
| Membrane Dimensions: |
3.9" Dia. x 40" L |
| Flow Rate: |
2,000 GPD (7,570 LPD) |
| Test Pressure: |
150 psi (1 MPa) |
| Average Salt Rejection (NaCl): |
90% |
| Average Hardness Rejection (MgSO4): |
97%+ |
| Single Element Recovery: |
15% |
| Feed Water Test Temperature: |
77°F (25°C) |
| Feed Water pH Range: |
3–10 |
| Chlorine Tolerance: |
< 0.1 ppm |
| Membrane Type: |
N9 Nanofiltration |
| Element Type: |
Spiral Wound |
| Outer Wrap: |
Tape Wrapped |
| End Style: |
Male PWT (Stinger Style) |
| For Housing: |
Standard 4" x 40" |
| Can Replace: |
DuPont FilmTec NF90-4040 |
| Manufacturer: |
Applied Membranes, Inc. |
| Country of Manufacture: |
Manufactured in the USA with globally sourced parts — Vista, California. |
Note: Performance specifications based on 2,000 mg/l magnesium sulfate, 150 psi (1 MPa) applied pressure, 77°F (25°C) feed water temperature, and the recovery listed in the table above. Element permeate flow may vary ±20%. Permeate flow rates for feed streams other than water will vary.
Physical Dimensions of M-N4040A9
| Total Length (L): |
40 in. (101.6 cm) |
| Membrane Length (I): |
38 in. (96 cm) |
| Diameter (D): |
3.9 in. (9.9 cm) |
| PWT (P): |
0.75 in. (1.9 cm) |
Replacement Compatibility for 4" x 40" Nanofiltration Membranes
Applied Membranes M-N4040A9 membrane elements fit industry standard 4040 membrane housing pressure vessels and can be used as a direct replacement for many industry-standard 4" x 40" spiral wound nanofiltration elements with 3/4" male product water tubes ("stinger style"). These include the DuPont FilmTec NF90-4040.
