Powered by Smartsupp
Skip to content

2.5"x21" | 365 GPD | Low Energy | Tape Wrap | FilmTec Membrane

Availability:
In Stock for Immediate Shipment
SKU XLE-2521
Original price $210.27 - Original price $210.27
Original price
$210.27
$210.27 - $210.27
Current price $210.27

DOW FilmTec Membrane Elements



DOW FILMTEC™ XLE-2521 Low Energy Reverse Osmosis Membrane Element



DOW FILMTEC TW30-2521 Elements produce high quality water for small commercial systems. DOW FILMTEC TW30-2521 elements are tape-wrapped. In addition to high quality water and low energy costs, DOW FILMTEC membranes also deliver savings by providing long lasting and reliable performance.



DOW FILMTEC Brackish Water Reverse Osmosis Elements can separate salts from water and are produced with an automated fabrication process for precision, consistency, and reliability. DOW FILMTEC RO membranes build on a tradition of leadership in the thin-film composite membrane industry and meet the challenges of higher rejection in lower-pressure operations.



DOW FILMTEC XLE-2521 is FDA – 21 CFR 177.2550; Food and Drug Administration Compliant.

Product Specifications

FilmTec Membranes are FDA CompliantGenuine DOW FilmTec Membrane Element



Specifications for XLE-2521



FilmTec Product:


XLE-2521


FilmTec Part Number:


154530
Size (Approximate): 2.5" Dia. x 21"L


Flow Rate:


365 gpd (1.38 m³/d)


Applied Pressure:


100 psig (6.9 bar)


Stabilized Salt Rejection:


99.0%


Active Surface Area:


13 Sq. Ft.


Single Element Recovery:


10%
Exterior:

Tape-Wrapped


Membrane Type:


Polyamide Thin-Film


Composite

Permeate flow and salt rejection based: 500 ppm NaCl feed stream, 77°F, 8% recovery, 100 psig.



Operating Limits for XLE-2521



Maximum Operating Temperature:


113°F (45°C)


Maximum Operating Pressure:


600 psig (41 bar)


Maximum Pressure Drop:


13 psig (0.9 bar)


Maximum Feed Flow Rate:


6 gpm (1.4m³/h)


pH Range, Continuous Operation*:


2-11


pH Range, Short-Term Cleaning**:


1-13


Maximum Feed Silt Density Index:


SDI 5


Fere Clorine Tolerance***:
<0.1ppm

*Maximum temperature for continuous operation above pH 10 is 95°F
**Refer to cleaning guidelines.


***Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure.




Related Products for use with XLE-2521

PV2521PVCAU

PVC Membrane Housing Pressure Vessel for 2.5" x 21" Membrane Element
PV2521SSAU-316

Stainless Steel Membrane Housing Pressure Vessel for 2.5" x 21" Membrane Element



Benefits of DOW FilmTec Commercial RO Membranes



  • Lower Operating Pressure reduces power consumption, lowering the cost of equipment and operation.


  • Reverse Osmosis water treatment removes up to 99% of total dissolved solids from water.


  • High flux results in high yields


  • High rejection provides good water quality


  • FilmTec performance and quality



Common Applications for FilmTec XLE-2521 Commercial RO Membranes:



  • Commercial Water Treatment Systems


  • Food Service


  • Medical and Research Institutions


  • Hospitality Industry



Physical Dimensions of DOW FilmTec XLE-2521

DOW FilmTec Commercial RO Membrane Drawing
INCHES (MM)
A

21.0 (533)
B

1.19 (30)
C

0.75 (19)
D

2.4 (61)

XLE-2521 Fits nominal 25x21 size pressure vessels.

For more information, please visit this products webpage.