Powered by Smartsupp Skip to content

4"x21" | 800 GPD | 99.6% Salt Rejection | Watermaker Seawater RO Membrane | Applied Membranes

by AMI
SKU M-S4021A
Availability:
In Stock for Immediate Shipment
Original price $440.00 - Original price $440.00
Original price
$440.00
$440.00 - $440.00
Current price $440.00

AMI 4x21 Seawater Desalination Reverse Osmosis Membranes
For Watermakers and Land-and-Sea Based Seawater Desalinators


Highest Salt Rejection Seawater RO Watermaker Membranes

AMI high rejection and high productivity seawater reverse osmosis membranes are specially designed for marine applications. AMI SWRO membranes are ideal for seawater desalination in shipboard applications, watermakers, land-based desalinators and sea-based desalinators. AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.

Looking for a replacement seawater desalination membrane element for your watermaker filter system? View our Watermaker Replacement Membrane Chart.

Specifications for SWRO Membranes for Watermakers


Benefits of AMI Seawater Desalination RO Membranes:

  • Convert seawater into drinking water on yachts, boats, cruise ships, off-shore platforms, and resorts
  • High Rejection & Flow Rate
  • Made in the USA
  • Manufactured in ISO 9001:2015 Certified Facilities
  • 100% Performance and Quality Tested
  • High Quality for Consistent and Reliable Performance
  • Uses the most advanced membrane film technology and manufacturing processes
  • Standard dimensions to fit in commonly available housings
Genuine AMI Membranes ISO USA Quality

M-S4021A Specifications

AMI Model Number M-4021A
Can Replace Models:



DOW SW30-4021
DuPont SW30-4021
FilmTec SW30-4021
Industry-Standard 4x21 Size Seawater RO Elements
Size (Approximate): 4" Dia. x 21"L
Flow Rate: 800 gpd (3.03 m³/d)
Applied Pressure: 800 psig (55 bar)
Stabilized Salt Rejection: 99.6%
Minimize Salt Rejection: 99.4%
Single Element Recovery: 4%
Exterior: Hard Shell Fiberglass
Membrane Type:
Polyamide Thin-Film
Composite

Permeate flow and salt rejection based on 32,000 ppm NaCl feed stream, pressure and recovery listed above. Element Permeate flow may vary +/- 20%

M-S4021A Operating Limits

Maximum Operating Temperature: 113°F (45°C)
Maximum Operating Pressure: 1,000 psig (69 bar)
Maximum Pressure Drop: 15 psig (1 bar)
Maximum Feed Flow Rate: 16 gpm (3.6³/h)
pH Range, Continuous Operation: 2-11
pH Range, Short-Term Cleaning: 1-13
Maximum Feed Silt Density Index: SDI 5
Fere Clorine Tolerance: 0


Related Products for use with M-S4021A Seawater Elements

C-C2510-A11 Membrane Cleaning Cartridge with Acid Cleaner to Remove Scale Buildup and Prolong Membrane Life
C-C2510-A22 Membrane Cleaning Cartridge with Alkaline Cleaner to Remove Organics and Prolong Membrane Life
C-C2510-A88 Membrane Preservative Cartridge for Preserving the System and Membrane During Extended Periods of Non-Operation.
655139-03 Oil Absorbing Filter Cartridge - Oil-Water Separator Replacement Cartridge, 20" Big Blue Pentair Pentek Filter
H-F10100CF Plankton Filter - 10" Standard 100 Micron Spun Polypropylene Replacement Filter Cartridge

Common Applications for AMI Seawater Watermaker Elements:

  • Seawater Desalination
  • Marine Applications
  • Watermaker RO Systems
  • Yachts

Physical Dimensions of AMI M-S4021A SWRO Marine Element

Reverse Osmosis Membrane for Watermakers and Seawater Desalination
INCHES (MM)
L 21 (533)
I 19 (480)
D 3.9 (99)
P 0.75 (19)