AMI 2.5x38 Seawater Desalination Reverse Osmosis Membrane AquaPro Replacement
For Replacement in Village Marine Watermaker Systems by Parker Racor

Add AMI Membrane Quality to your Existing Seawater Desalination Equipment

AMI 2.5" x 38" Seawater RO Membranes produce drinking water from seawater and are intended for use as replacements in Village Marine Watermakers Stowaway, LT, LTM, and PW Series with exceptional value and performance benefits.  AMI SWRO membranes offer the high rejection and high productivity that is ideal for seawater desalination in shipboard applications, watermakers, land-based desalinators and sea-based desalinators. AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.  Looking for a replacement seawater desalination membrane element for your watermaker filter system? View our Watermaker Replacement Membrane Chart. Benefits of AMI Seawater Membranes for Village Marine Watermakers: Add AMI Membrane Quality and Value to your Existing Seawater Desalination Equipment Convert seawater into drinking water on yachts, boats, cruise ships, off- shore platforms, and resorts High Rejection & Flow Rate  Made in the USA  Manufactured in ISO 9001:2015 Certified Facilities  100% Performance and Quality Tested  High Quality for Consistent and Reliable Performance Uses the most advanced membrane film technology and manufacturing processes Standard dimensions to fit in commonly available housings		Specifications for M-S2538A     AMI Model Number M-S2538A For use in Systems: Stowaway 800 LT Series 800 - 1800 LTM Series 500 - 1800 Pure Water Series 600-2,000 PW Series 600-2,000 Can Replace Models:   Village Marine 33-0238 AquaPro 33-0238 Parker 33-0238 Size (Approximate): 2.5" Dia. x 38"L Flow Rate: 550 gpd (2081 lpd) Applied Pressure: 800 psig (55 bar) Stabilized Salt Rejection: 99.6% Minimize Salt Rejection: 99.4% Single Element Recovery: 8% Exterior: Hard Shell Fiberglass Membrane Type:   Polyamide Thin-Film Composite     Permeate flow and salt rejection based on 32,000 ppm NaCl feed stream, pressure and recovery listed above.  Element Permeate flow may vary +/- 20%   Operating Limits for M-S2538A     Maximum Operating Temperature: 113°F (45°C) Maximum Operating Pressure: 1,000 psig (69 bar) Maximum Pressure Drop: 15 psig (1 bar) Maximum Feed Flow Rate: 6 gpm (1.4m³/h) pH Range, Continuous Operation: 2-11 pH Range, Short-Term Cleaning: 1-13 Maximum Feed Silt Density Index: SDI 5 Fere Clorine Tolerance: 0

Related Products for use with M-S2538A Seawater Elements

Common Applications for AMI Seawater Watermaker Elements:

Physical Dimensions of M-S2538A Village Marine Replacement Element

INCHES (MM) L 38.0 (965) I 36 (96) D 2.4 (61) P 0.75 (19)

Replacement Compatibility for 2.5 Inch x 38 Inch Seawater RO Membranes

AMI 2538 membrane elements are intended to be used as direct replacements for Village Marine (VMT) Parker Racor AquaPro Membrane 33-0238, and are intended for use in any system using that element.  Some common systems using these elements are Parker Racor Village Marine Stowaway, LT series, LTM Series,a nd PW Series.  These include but are not limited to models:  STW-800, LT-500, LT-800, LT-1000, LT-1300, LT-1800, LTM-500, LTM-800, LTM-1000, LTM-1300, LTM-1800, PW-600, PW-800, PW-1200, PW-1600, PW-2000, 90-8299, 90-8300, 90-8301, 90-6019, 90-6047, 90-6048, 90-6078, 90-6049, 90-6050, 90-6051, 90-6079, 90-6052, 90-6053, 90-6080, 90-6054, 90-6055, 90-6081, 90-6056, 90-6076, 90-6077, 90-8125, 90-8006, 90-8223, 90-8636, 90-8635, 90-8634, 90-8028, 90-8637, 90-8047, 90-8638, 90-8292, 90-8038, 90-8210, 90-8606, 90-8212, 90-8040, 90-8600, 90-8603, 90-8601, 90-8017, 90-8604, 90-8554, 90-8039, 90-8597, 90-8598, 90-8011

If you do not see your system listed or wish to learn more about compatibilyt, please contact us.  Our certified water treatment experts will be happy to discuss your application.  To ensure prompt and accurate information, please include as much information about your system as possible, including:  model, manufacturer, model of membranes being replaced, any available. product manuals or literature associated with your system, and photographs of your system or membranes.