2.5"x38" | 210 gpd | RO Membrane for Village Marine Watermaker

In Stock for Immediate Shipment.
Price $347.29
More Information
Price $347.29

AMI SWRO Seawater Reverse Osmosis Membrane Elements for Watermakers
AMI 2.5x38 Seawater Desalination Reverse Osmosis Membrane AquaPro Replacement
For Replacement in Village Marine LIttle Wonder 200 Watermaker Systems by Parker Racor

Add AMI Membrane Quality to your Existing Seawater Desalination Equipment

AMI 2.5" x 38" Seawater RO Membranes produce drinking water from seawater and are intended for use as replacements in Village Marine Watermakers Little Wonder 200 LW-200 with exceptional value and performance benefits.  AMI SWRO membranes offer the high rejection and high productivity that is ideal for seawater desalination in shipboard applications, watermakers, land-based desalinators and sea-based desalinator.

AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested. 

Looking for a replacement seawater desalination membrane element for your watermaker filter system? View our Watermaker Replacement Membrane Chart.

Benefits of AMI Seawater Membranes for Village Marine Watermakers:

  • Add AMI Membrane Quality and Value to your Existing Seawater Desalination Equipment
  • Convert seawater into drinking water on yachts, boats, cruise ships, off- shore platforms, and resorts
  • High Rejection & Flow Rate 
  • Made in the USA 
  • Manufactured in ISO 9001:2015 Certified Facilities 
  • 100% Performance and Quality Tested 
  • High Quality for Consistent and Reliable Performance
  • Uses the most advanced membrane film technology and manufacturing processes
  • Standard dimensions to fit in commonly available housings
Genuine AMI Membranes ISO USA Quality

Specifications for M-S2538A-210 33-3002

AMI Model Number M-S2538A-210
For use in Systems: Little Wonder 200
Can Replace Models:

Village Marine 33-3002
AquaPro 33-3002
Parker 33-3002
Size (Approximate): 2.5" Dia. x 38"L
Flow Rate: 210 gpd (795 lpd)
Applied Pressure: 800 psig (55 bar)
Stabilized Salt Rejection: 99.6%
Minimize Salt Rejection: 99.4%
Single Element Recovery: 8%
Exterior: Hard Shell Fiberglass
Membrane Type:
Polyamide Thin-Film

Permeate flow and salt rejection based on 32,000 ppm NaCl feed stream, pressure and recovery listed above.  Element Permeate flow may vary +/- 20%

Operating Limits for M-S2538A-210 33-3002

Maximum Operating Temperature: 113°F (45°C)
Maximum Operating Pressure: 1,000 psig (69 bar)
Maximum Pressure Drop: 15 psig (1 bar)
Maximum Feed Flow Rate: 6 gpm (1.4m³/h)
pH Range, Continuous Operation: 2-11
pH Range, Short-Term Cleaning: 1-13
Maximum Feed Silt Density Index: SDI 5
Fere Clorine Tolerance: 0


Related Products for use with M-S2538A-210 33-3002 Seawater Elements

C-C2510-A11 Membrane Cleaning Cartridge with Acid Cleaner to Remove Scale Buildup and Prolong Membrane Life
C-C2510-A22 Membrane Cleaning Cartridge with Alkaline Cleaner to Remove Organics and Prolong Membrane Life
C-C2510-A88  Membrane Preservative Cartridge for Preserving the System and Membrane During Extended Periods of Non-Operation.
655139-03 Oil Absorbing Filter Cartridge - Oil-Water Separator Replacement Cartridge, 20" Big Blue Pentair Pentek  Filter
H-F10100CF Plankton Filter  - 10" Standard 100 Micron Spun Polypropylene Replacement Filter Cartridge

Common Applications for AMI Seawater Watermaker Elements:

  • Seawater Desalination
  • Marine Applications
  • Watermaker RO Systems
  • Yachts

Physical Dimensions of M-S2538A-210 Village Marine Replacement Element

Reverse Osmosis Membrane for Watermakers and Seawater Desalination  
L 38.0 (965)
I 36 (96)
D 2.4 (61)
P 0.75 (19)

Replacement Compatibility for 2.5 Inch x 38 Inch Seawater RO Membranes

AMI 2538 200 GPD membrane elements are intended to be used as direct replacements for Village Marine (VMT) Parker Racor AquaPro Membranes 33-3002, for use in any system using this element.  This includes Parker Racor Village Marine Little Wonder 200 LW-200.

If you do not see your system listed or wish to learn more about compatibilyt, please contact us.  Our certified water treatment experts will be happy to discuss your application.  To ensure prompt and accurate information, please include as much information about your system as possible, including:  model, manufacturer, model of membranes being replaced, any available. product manuals or literature associated with your system, and photographs of your system or membranes.