AMI 100GPD home RO membrane elements are among the finest in the industry. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, high quality which makes AMI Membranes the natural choice for use in home or office RO systems. AMI Home RO Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard residential home RO Housings for point of use systems. The AMI M-T1812A100 produces 100 gallons per day at a minimum salt rejection of 96%. This 100 GPD membrane fits a standard residential 2-inch by 12-inch membrane housing.
AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.

M-T1812A100 is certified to NSF/ANSI 58 for the reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Turbidity, Fluoride, Lead, Radium 226/228, Selenium, and TDS.
|
|
Specifications for M-T1812A100
| |
AMI Part Number: |
M-T1812A100 |
Flow Rate: |
100 GPD (379 LPD) |
Membrane Type: |
TFC (Thin Film Composite) |
Minimum Salt Rejection: |
96%* |
Stabilized Salt Rejection: |
98%* |
For Housing: |
Standard Residential 2" x 12" |
Replacement for System:
|
AAA-1005, AAA-1005P, AAA-1006UV, and nearly any 100 GPD home RO system with a standard housing. |
Replaces Membranes: |
DOW FilmTec TW30-1812-100
DOW FilmTec TW30-1812-100HR
DuPont TW30-1812-100HR
WaterAnywhere 1812-100-RO Axeon TF-1812-100 and many more: Check Full List |
| |

Since the presence of free chlorine and other oxidizing agents will cause premature membrane failure, a carbon block filter should be used before this RO membrane element when filtering chlorinated water.Performance specifications based on 500 ppm tap water, 50 psi (0.35 MPa) applied pressure, 77°F (25°C) feed water temperature, feed water pH 7-8 and 15% recovery. Element permeate flow may vary ± 15%.*Salt Rejection shown is from internal test data. |