Long-Life Cartridges Designed for Chlorine Taste & Odor Reduction
Pentair Pentek Coconut-Based Carbon Block Cartridges are highly effective at reducing unwanted taste and odor, and chlorine taste & odor from potable drinking water, and they are equally effective at reducing fine sediment. Pentek CCBC10 155713-43 is 10” standard sized, for universal replacement in any industry-standard 10" filter housing. (Filter Cartridge Dimensions 2.88” OD x 9 ¾”L | Approximate Size of Housing: 4½” OD x 11¾”L).
Coconut Based Carbon Block Cartridges are made from a water-washed, coconut-carbon formulation. This process and media yield a cartridge with high chlorine taste & odor reduction capacity. These cartridges are protected by an outer wrap designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.
Pentek 155713-43 CCBC-10 is ideal for point-of-use (POU) applications, as pre-treatment or post treatment polishing filters in under-sink (under-the-counter) home RO systems, or as standalone filtration solutions for a wide range of residential, food service, commercial and industrial applications.
Benefits of Pentek CCBC Coconut Shell Based Carbon Filters
- Premium high capacity bad taste and odor, and chlorine taste & odor reduction
- Reduces particles as small as 1 micron in size
- Enhanced dirt holding capacity and useful life
- Water-washed coconut-carbon formulation
- Pentek CCBC-10 is Tested and Certified by NSF International to NSF/ANSI Standard 42 for material requirements only.
|
|
Pentek CCBC-10 Specifications
|
|
| Pentek Part #: |
155713-43 |
| Pentek Model: |
CCBC-10 |
| Nominal Size: |
10" Standard |
| Cartridge Dimensions: |
2.88" OD. × 9.75"L |
Fits Housing:
|
10" Standard or SlimLine (Approx.4½” OD x 11¾”L) |
| Chlorine Taste & Odor Capacity: |
>20,000 gallons @ 1 gpm |
| VOC Reduction: |
>800 gallons @ 0.6 gpm |
| Nominal Filtration Rating: |
1 micron |
| Initial ΔP: |
3.3 psi @ 1.0 gpm |
Filter Media:
|
Water-Washed Coconut Based Carbon |
| End Caps: |
Polypropylene |
| Outer Wrap/Shell: |
Polyolefin |
| Netting: |
Polyethylene |
| Gaskets: |
Buna-N |
| Temperature Rating: |
40-125°F (4.4-51.7°C) |
|
|
|
