Powered by Smartsupp Skip to content
Order Status Order Terms FAQs Blog Contact Us About Us
4" x 40" | 2350 GPD | 100 psi | 99.2% Rej. | Hydranautics ESPA Ultra-Low Pressure Membrane (Replaces ESPA4-4040)

4" x 40" | 2350 GPD | 100 psi | 99.2% Rej. | Hydranautics ESPA Ultra-Low Pressure Membrane (Replaces ESPA4-4040)

by Hydranautics
SKU ESPA4-LD-4040
Availability:
Ships in 7 days
$290.00 - $290.00
$290.00
$290.00 - $290.00
$290.00

Hydranautics Membrane Elements
Hydranautics ESPA4-LD-4040 4" x 40" Membrane Element

Combining energy efficiency with high rejection

Hydranautics ESPA4-LD-4040 is the lowest feed pressure membranes offering low energy consumption. ESPA4-LD-4040 membranes require ultra-low pressures without compromising high salt rejection and are commonly used in the second pass of a reverse osmosis system.

The ESPA4-LD-4040 membrane is designed with Low differential (LD) Technology to minimize colloidal fouling when used with conventional pre-treatment equipment. Hydranautics ESPA4-LD membranes offer consistently low feed pressures and longer intervals between cleanings.

ESPA4-LD-4040 is the replacement for Hydranautics ESPA4-4040 membrane element, which has been discontinued by the manufacturer.

The energy required to pressurize RO feed water is the largest contributor to the total energy consumption of the RO plant. ESPA membranes are the choice for applications demanding high-energy efficiency, with uncompromised productivity and salt rejection. Operating at significantly lower pressures, ESPA elements produce high quality water in a range of water treatment applications, ensuring energy cost savings.

ESPA membranes are used in the treatment of drinking water, industrial process waters, municipal and industrial waste water recovery and reuse because of this exception performance capability. These membranes also serve as part of polishing units in seawater desalination plants when boron rejection is critical.

ESPA4-LD-4040 Specifications

Manufacturer Model: ESPA4-LD-4040
Brand: Hydranautics Nitto
Replaces Model: Hydranautics ESPA4-4040
Permeate Flow: 2,350 gpd (8.9m3/day)
Salt Rejection: 99.2% (99.0% Minimum)
Test Feed Pressure: 100 psi (0.7 MPa)
Test Temperature: 77°F (25°C)
Test Recovery: 15%
Test pH Range: 6.5 to 7.0 pH
Test Feed: 500 ppm NaCl Solution
Configuration: Spiral Wound
Membrane Polymer: Composite Polyamide
Membrane Active Area: 80 ft2 (7.4 m2)
Feed Spacer: 34 mil (0.864 mm)


Product Specifications for Hydranautics Membranes

Have A Question? Let’s Talk.

CONTACT US
FAQS