Powered by Smartsupp Skip to content

4"x40" | 97% Salt Rejection | 2,500 GPD | FilmTec NF270 Element

SKU NF270-4040
Availability:
In Stock for Immediate Shipment
Original price $422.17 - Original price $422.17
Original price
$422.17
$422.17 - $422.17
Current price $422.17

DOW FilmTec Membrane Elements



DOW FILMTEC NF270-4040 Nanofiltration (NF) Membrane Elements for Commercial Systems



DOW FILMTEC NF270-4040 Elements are ideal for removing a high percentage of TOC and THM precursors with medium to high salt passage and medium hardness passage in commercial systems. The NF270 nanofiltration membrane is an ideal choice for surface water and ground water where good organic removal is desired with partial softening. DOW FILMTEC NF270-4040 elements have a fiberglass outer wrap.



DOW FILMTEC NF270-4040 is FDA – 21 CFR 177.2550; Food and Drug Administration Compliant.

Product Specifications

FilmTec Membranes are FDA CompliantGenuine DOW FilmTec Membrane Element



Common Applications for FilmTec NF270-4040 Nanofiltration Elements:



  • Production of Drinking Water


  • Demineralization in Small Commercial Applications



Benefits of DOW FilmTec Commercial NF Membranes

  • High flux results in high yields


  • Low energy usage reduces power consumption and costs
  • Durable with good cleanability for long element life


  • FilmTec performance and quality



Specifications for NF270-4040



FilmTec Product:


NF270-4040


FilmTec Part Number:


149987
Size (Approximate): 4" Dia. x 40"L


Flow Rate:


2,500 gpd (9.5 m³/d)


Applied Pressure:


70 psig (4.8 bar)


Stabilized Salt Rejection:


>97%


Single Element Recovery:


15%
Exterior:

Hard Shell Fiberglass


Membrane Type:


Polyamide Thin-Film


Composite

Permeate flow and salt rejection based: 2,000 ppm MgSO4 feed stream, 77°F, 15% recovery, 70 psig.



Operating Limits for NF270-4040



Maximum Operating Temperature:


113°F (45°C)


Maximum Operating Pressure:


600 psig (41 bar)


Maximum Pressure Drop:


15 psig (0.9 bar)


Maximum Feed Flow Rate:


16 gpm (1.4m³/h)


pH Range, Continuous Operation*:


2-11


pH Range, Short-Term Cleaning**:


1-13


Maximum Feed Silt Density Index:


SDI 5


Fere Clorine Tolerance***:
<0.1ppm

*Maximum temperature for continuous operation above pH 10 is 95°F
**Refer to cleaning guidelines.


***Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure.




Related Products for use with NF270-4040

PV4040PWG

PVC Membrane Housing Pressure Vessel for 4" x 40" Membrane Element
PV4080PWG

PVC Membrane Housing Pressure Vessel for (2) 4"x40" Membrane Elements
PV4040SSAU-316

Stainless Steel Membrane Housing Pressure Vessel for 4" x 40" Membrane Element
PV4080SSAU-316 Stainless Steel Membrane Housing Pressure Vessel for (2) 4" x 40" Membrane Element
PV4040SSAW-316

Stainless Steel End-Clamp-Style Membane Housing Pressure Vessels for 4" x 40" Membrane Elements
PV4080SSAW-316 Stainless Steel End-Clamp-Style Membane Housing Pressure Vessels for (2) 4" x 40" Membrane Elements
PV-IN410 Interconnector Coupler for Installing Multiple Elements in a housing - FilmTec part # 89055. Includes two o-rings.



Physical Dimensions of DOW FilmTec NF270-4040

DOW FilmTec Commercial NF Membrane Drawing
INCHES (MM)
A

40.0 (1,016)
B

1.05 (27)
C

0.75 (19) OD
D

3.9 (99)

NF270-4040 Fits nominal 4-Inch I.D. pressure vessels.

For more information, please visit this products webpage.