O-Ring Set for AMI Double-Seal Filter Housings for 10" Standard Water Filter (AAA-RO Prefilters)
| Brand | APPLIED MEMBRANES INC. | |
|---|---|---|
O-Ring Set for AMI Double-Seal™ Filter Housings for 10" Standard Water Filter
Set of Upper and Lower O-Rings | Complete Change-out for one Housing
Essential for Leak PreventionAMI Filter Housing O-rings ensure a tight seal between the lid and the sump of the housing to prevent leaks. The o-rings should be inspected each time the filter is replaced or the sump is removed from the cap before it is reinstalled and placed back into service. If any twisting, deforming, wear, cracks or tears are observed, the o-rings should be replaced. OR-H10FWWA-SET includes one each of the upper (inside of cap) and lower (outside of sump) o-rings needed to replace both seals in one housing. These o-rings are for AMI Double-Seal™ brand Filter Housings, which are used in AMI AAA-RO Series Home RO Systems pre-filters, and house 10" Standard filter cartridges. Approximate dimensions of the filter housing are 4.5"OD x 11.4" Length - The filter housings are used for filter cartridges of the 10" standard size (2-2.75"OD x 9.75" Length). |
O-Ring Specifications
Used for AMI Water Filter Housings:
|