Facebook Pixel

BL983319-1

TDS Mini Controller (0 to 1999 ppm) | Panel Mounted Process Controller | Hanna Instruments

SKU
BL983319-1
Hanna BL983319 Controller is supplied with mounting brackets, transparent cover and instruction manual.  HI7634-00 probe is not included and must be ordered separately
Price was $200.00 Special Price $170.00
More Information
Manufacturer Hanna Instruments
Hanna BL983319 Controller is supplied with mounting brackets, transparent cover and instruction manual.  HI7634-00 probe is not included and must be ordered separately

Hanna Instruments Water Quality Testers
Hanna Instruments BL983319-1 TDS Mini Controller | 115/230 VAC | 50/60 Hz


Hanna BL983319 Controller is supplied with mounting brackets, transparent cover and instruction manual.  HI7634-00 probe is not included and must be ordered separately

The BL983319 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) in a process stream that is within the 0 to 1999 ppm (mg/L) range. The device features a large LCD with protective cover. Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is below the set point. The relay can be used to supply power to a dosing pump to add fertilizer to a nutrient solution in order to maintain an ideal concentration.  *The BL983319 uses a 0.65 conversion factor in which 100 μS/cm = 65 ppm.

  • Multicolor LED Indicator
  • Fire Retardant Casing
  • Fire Retardant Casing

Hanna BL983319 Features at a Glance

  • Adjustable Dry Contact Dosing Relay
    The BL983319 features a dosing relay that is activated when the reading is above a user programmable set point.

  • Programmable Overdose Protection
    For enhanced safety the mini controller can be programmed to deactivate the dosing relay if the set point is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled.

  • Relay Control Override
    With the flick of a switch the mini controller's relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump.

  • Multicolor LED Indicator allows an operator to quickly check the status of the controller.
    • Green = Meter in measurement mode and reading is below the set point.
    • Orange/Yellow = Reading is above the set point and the relay is activated.
    • Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded.

  • Fuse Protected Dosing Contacts
    The relay dosing contact is rated for up to 2A load and is fuse protected.

  • Labeled Termination Connections
    Quick-connect terminal blocks are clearly labeled for easy connection to power, conductivity probe and relay that can be used to operate a dosing pump, valve, audible alarm, or light.
 

Hanna BL983319-1 Specifications

  
Model: BL983319-1
Brand:  Hanna Instruments
TDS Range: 0 to 1999 mg/L (ppm)
TDS Resolution: 1 mg/L (ppm)
TDS Accuracy: ±2% F.S @ 25°C (77°F)
TDS Conversion Factor: 0.65
Temperature Compensation: automatic from 5 to 50°C (41 to 122°F) with β =2%/°C
Calibration: manual, with CAL trimmer
Dosing Relay:


maximum 2A (fuse protected), 250 Vac, 30 VDC Contact close when measure: > setpoint
Overtime:
adjustable, typically from 5 to approximately 30 minutes
Power Supply:
115/230 VAC; 50/60Hz
Dimensions:

3.3 x 2.1 x 3.9"
(83 x 53 x 99 mm)
Weight: 10.6 oz (300 g)
  

Product Use Instructions - Water Treatment Equipment

Hanna Instruments BL983319-1 TDS Mini Controller (0 to 1999 ppm) Panel Mounted Hanna Instruments BL983319-1 TDS Mini Controller (0 to 1999 ppm) Panel Mounted Hanna Instruments BL983319-1 TDS Mini Controller (0 to 1999 ppm) Panel Mounted
Front View
Installation cut-out dimensions are provided as well as outside panel dimensions.
Side View
Adjustable location brackets allow the controller to slide easily and securely into place.