M-T4038AXLE

4" x 38" | 2,750 GPD | 100 PSI | XLE Extra-Low Energy RO Membrane | Applied Membranes

In Stock for Immediate Shipment.
SKU
M-T4038AXLE
$400.67
More Information
Brand APPLIED MEMBRANES INC.
 


4" x 38" Extra-Low Energy Reverse Osmosis Membrane | Tap or Brackish Water | 2,750 GPD at 100psi

4x38 RO Membrane for Reverse Osmosis Water Treatment Systems | Small Commercial, Agriculture, Hydroponics, Medical, and more.


AMI XLE Extra-Low Energy RO membrane elements produce high quality water from tap or brackish water for use in small commercial, agriculture, hydro ponic, medical, and other application RO systems, and are among the finest in the industry.  AMI Extra-Low Energy (Low Pressure) XLE RO Membrane elements are specially designed to run at 100 psi while producing similar product flow as standard elements at higher pressures. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting  performance, making AMI Membranes the natural choice for use in small commercial RO systems.  AMI 4038 RO Membranes are constructed of low pressure tap water TFC (thin film composite) membrane material and fit standard PVC and Stainless Steel RO Membrane Housings. 

AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.

Genuine AMI Membranes ISO USA Quality

 

M-T4038AXLE Specifications

  
AMI Part Number: M-T4038AXLE
Membrane Size (Nominal): 4 x 38
Membrane Dimensions: 3.9" Dia. x 38" L
Flow Rate: 2,750 GPD (12,501 LPD)
Applied Pressure: 100 psi (0.7 MPa)
Stabilized Salt Rejection: 99%
For Housing: 4" x 38"
Outer Wrap: Tape Wrapped
Membrane Type: Tap or Brackish Water
Membrane Sheet: TFC (Thin Film Composite)
Element Type: Spiral Wound
Feed Water Test Temperature: 77°F  (25°C)
Single Element Recovery: 15%
Chlorine Tolerance: 0
Feed water pH Range: 2-11
Manufacturer: Applied Membranes, Inc.
Country of Manufacture: United States (USA)
  
Note: Performance specifications based on 500 mg/l sodium chloride, 100 psi (0.7 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%. Caution: Do not run these membranes at a pressure that will produce more than their rated product flow rate. This will lead to premature fouling of the membrane resulting in drop in permeate flow and higher TDS of the permeate.


Features of AMI XLE Low Pressure RO Membranes for Small Commercial, Hydroponic, Cannabis and Agriculture

  • Increase crop quality and yield.
  • Reduce operating costs and wear and tear on your system by running your system at a lower pressure.
  • High Rejection & Flow Rate
  • Made in the USA
  • Manufactured in our ISO 9001:2015 Certified Facilities
  • 100% Performance and Quality Tested
  • Backed by our Experienced Technical Support Staff
  • High Quality for Consistent and Reliable Performance
  • Uses the most advanced membrane film technology and manufacturing processes
  • Standard dimensions to fit in commonly available housings


Applications for AMI 4038 XLE Low Pressure RO Membranes

  • Agriculture
  • Hydroponics
  • Cannabis
  • Restaurants
  • Aquariums
  • Whole House (Residential)
  • Office
  • Institutions
  • Hotels
  • Hospitals
  • Disaster Relief
  • Spot Free Rinse/Car Wash
  • Labs
  • Pharmaceutical
  • Humidification
  • Misting
  • Manufacturing
  • Rinse Water
  • Bottled Water
  • Water stores
  • Beverage
  • Food Processing
  • Ice Makers
  • Commercial Water Treatment
  • Ice Makers
  • Tap Water
  • Brackish Water
  • Wide Variety of Other Applications

Low Energy RO Membrane 4x40 inch

Physical Dimensions of M-T4038AXLE:

  

Total Length (L):

38 In. (96.5 cm)

Membrane Length (I):

35.8 In. (91 cm)

Diameter (D):

3.9 In. (9.9 cm)

PWT (P):

0.75 In. (1.9 cm)